TileTech Heavy Duty Grime Remover

TileTech Heavy Duty Grime Remover effectively removes oil, grease, ingrained dirt, and old wax layers. It is suitable for interior and exterior use, on both glazed and unglazed tiles.

Recommended for use on

• Travertine
• Natural Stone
• Sandstone
• Slate
• Marble
• Granite
• Terracotta
• Quarry Tiles
• Brick
• Concrete
• External Paving
• Grouting

Directions

Important   Any alkalinity remaining on surfaces after treatment with this product should be completely neutralised by applying a little clean water with a sponge.

In mild cases and on absorbent tiles: Dilute 1 part TileTech Heavy Duty Grime Remover to 10 parts warm water. Apply with a cloth or mop. Wipe off thoroughly with a clean damp cloth.

In more severe cases: Dilute 1 part TileTech Heavy Duty Grime Remover to 3 parts warm water. Apply liberally, spreading over surface of tiles. If necessary, agitate with a scrubbing brush. Leave to react for 5-10 minutes, while keeping the area wet with additional cleaning solution. Rinse thoroughly with clean water.

Coverage

Mild - approximately 50m² 
Severe - approximately 20m² 
Extremely severe - approximately 5-10m²

Attention

Keep out of reach of children. 
Use gloves to apply. 
Avoid contact with eyes and skin. 
In case of contact with eyes, rinse with plenty of water and seek medical advice. 
In case of swallowing, seek medical advice.

This product should not be used for everyday cleaning of sealed floors or walls.

This information is offered without guarantee. Local conditions and the surfaces to be treated must be taken into account when using this product. In case of doubt, the product should be tested on an inconspicuous area.

Please call 0844 858 2871 if you require any additional information our sealing and cleaning products.