Ironwax Satin Finish Tile Sealer

Easy to apply, low maintenance self-shine satin finish acrylic sealer.

• Enhances colour and texture.
• Protects against staining and stubborn dirt.
• Easy to maintain.
• May be used on travertine, limestone, sandstone, slate, un-polished marble, terracotta, quarry, bricks, terrazzo and concrete.
• Suitable for domestic and commercial use
• Suitable for interior & exterior use

**FREE DELIVERY**

Other Info

Instructions:

Ensure surface to be treated is completely clean, dry and free from cement and grout stain. Any moisture in the floor may cause the Satin Tile Sealer to dry opaque or prevent the seal from reaching full hardness. Using a paintbrush or soft fluff-free cloth, apply a thin coat of LTP Satin Tile Sealer evenly in one direction. Do not rub or buff the surface but allow to dry (approx 1 hour). Apply a second coat at right angles to the first. Subsequent coats should be applied at right angles to the previous. Do not over apply as too many coats may cause unsightly build up of Satin Sealer and/or reduce the efficiency of the product. Satin Tile Sealer hardens after about an hour but will take a further three days to achieve full hardness and become fully water resistant. If in doubt, experiment on spare tiles to establish the optimum number of coats before general use.

Attention:

Avoid shaking the bottle prior to use. Frothing of liquid may lead to an inconsistent finish. Keep out of reach of children. Store in a frost proof place.

Avoid using strong detergents and kitchen to wash floors treated with LTP Satin Tile Sealer. Do not use below freezing. After contact with skin, wash with soap and water. Satin Sealer may not properly adhere to the most highly vitrified quarry tiles or ceramics. If in doubt, test on an inconspicuous area prior to general application. On higher porosity floor materials, additional coats of LTP Satin Tile Sealer may be required. For interior use.

Maintenance:

Routinely sweep the floor. Use LTP Floorshire to clean and protect the floor. In areas where the seal becomes worn, reseal using more LTP Satin Sealer. At some stage, complete renovation of the seal may be desired. In this case use LTP Grimex to strip the original seal before re-sealing with LTP Satin Tile Sealer.

This information is offered without guarantee. The material should be used so as to take account of the local conditions and the surfaces to be treated. In case of doubt, the product should be tried out in an inconspicuous area

Please call 0845 604 4534 if you require any additional information on LTP products.